Build Steps PetaLinux Tools Build Guide for Ultra96-V2 Avnet out of box BSP 2018.3 Build First Stage Bootloader (FSBL) for Ultra96 V2...

Ultra96-V2 Initial Factory Setup This post demonstrates how to flash a new SSD card with "PetaLinux 2020.1" factory distribution. ...

This post lists links to all of the installers you'd likely use to work with the Ultra96-v2. You will need a Xilinx account to access...

This post lists the difference in price between the ZCU102 and the Ultra96, which parts are used on the Ultra96-V2 and the ZCU102, the...

This short post lists the cost, part # and temperature differences between the commercial and industrial Ultra96-V2. It also includes an...

You need a AES-ULTRA960V2-G, AES-ACC-U96-JTAG, AES-ACC-U96-4APWR from Avnet and a USB 2.0 A-Male to Micro B Cable.

This post describes how to build a hardwre platform for the Ultra96v2 board in Xilinx Vivado. This will allow you to use Xilinx SDK to...

This post describes how to boot a "Hello World" application on the Ultra96v2's R5 processor over JTAG. The Xilinx Software Commandline...

This post describes how to boot a "Hello World" application on the Ultra96v2 board over JTAG. The Xilinx Software Commandline Tool (XSCT)...

Before performing these steps, its required that the following tutorials have been followed and completed. Runnng Barebones Apps on the...

Before performing these steps, its required that the following tutorials have been followed and completed. https://www.centennialsoftware...

There is a set of tutorials that is a good starting point for getting your Ultra96-V2 up and running. The tutorials are at ...

This guide is meant to supplement the excellent "Ultra96-V2 Hardware and Tools Initial Setup" blog entry by Brian Davis, which will be...

If you do not already have an Avnet Account - create one. The Ultra96-V2 is an Avnet product. Order (3) components from Avnet to have a...