There is a set of tutorials that is a good starting point for getting your Ultra96-V2 up and running. The tutorials are at ...

This post shows you how to create a BOOT.bin with a Hello World bare-metal application and a bitstream created in [Run Hello World on a...

This post lists step-by-step instructions for creating an AXI slave with an interrupt using Vivado HLS, integrating the slave into a...

This post shows how to create a Xilinx Zynq-7000 + AXI slave in Vivado 2018.2 and read/write the AXI slave from the ARM9 of the Zynq-7000...

This post shows you how to connect the JTAG and serial port of the ZC702, where to get the USB-to-serial port driver and how to configure...

This post shows how run Hello World on a Xilinx ZC702. It covers: creating a design in Vivado, exporting the design to the SDK and...

This post discusses the Xilinx SDK Internal Error: The folder "C:\....\.metadata" is read-only. Quick Workaround Remove spaces in your...

This post lists how to create a complete bare-metal application that boots from the Micron Quad SPI and what happens during boot. The...