top of page
Search
May 2, 20191 min read
Set up the JTAG and Serial Port on the ZC702
This post shows you how to connect the JTAG and serial port of the ZC702, where to get the USB-to-serial port driver and how to configure...
Apr 25, 20194 min read
Run Hello World on a ZC702
This post shows how run Hello World on a Xilinx ZC702. It covers: creating a design in Vivado, exporting the design to the SDK and...
Feb 20, 20192 min read
Bare-Metal Application Boot from Flash on the Xilinx Zynq-7000 of the ZC702
This post lists how to create a complete bare-metal application that boots from the Micron Quad SPI and what happens during boot. The...
Oct 19, 20183 min read
Lab 1 SDSoC Build and Load
This post is my run through of SDSoC Lab 1 Tutorial at [link]. Prerequisites Install SDSoC on Linux using a free 60-day trial and launch...
Sep 11, 20181 min read
ZC702 BIST Switch and Jumper Setting
This post shows what each switch and jumper should be set to, to correctly run BIST on the ZC702. Default Switch Settings SW10 SW11 SW12...
bottom of page