"ZCU102" Development Using an Ultra96-V2
You need a AES-ULTRA960V2-G, AES-ACC-U96-JTAG, AES-ACC-U96-4APWR from Avnet and a USB 2.0 A-Male to Micro B Cable.
top of page
Search
Sep 29, 20181 min read
Access PetaLinux Tool Commands, Build Everything and Program U-Boot and the Linux Kernel
This post shows how to get access to PetaLinux Tools commands, build everything and program U-Boot and the Linux kernel onto the ZCU102....
Sep 29, 20181 min read
Pictures of SW6 for every ZCU102 Zynq UltraScale+ MPSoC Boot Mode
This post shows pictures of setting SW6 on the ZCU102 to every boot mode that the Zynq UltraScale+ MPSoC supports. Files for post at...
Sep 22, 20183 min read
ZCU102 Development Using 2018.2 on a Linux VM Running on Windows: Part 2
This post is part 2 of a series that contains everything you need to develop software for the ZCU102 using a Linux VM running on Windows...
Sep 9, 20181 min read
ZCU102 Digilent USB-to-JTAG Module, Circuit, Pictures and Diagram
This post contains details about the ZCU102's USB-to-JTAG Digilent module, the circuit its used in, a picture of the components on the...
Sep 9, 20181 min read
Diagram of the ZCU102 JTAG Chain
This post shows a block diagram of the Xilinx ZCU102 Evaluation Board's JTAG chain. Here is the JTAG chain on rev 1.0 and 1.1 of the...
bottom of page