Successful 2019.1 PetaLinux U-Boot JTAG Boot Log
This post lists a successful JTAG boot of U-Boot. This can be useful if a build doesn't boot and a developer is trying to figure out why....
top of page
Search
Mar 7, 20219 min read
Create a MicroBlaze, Test the UART in SDK, and Boot Linux using 2019.1 Vivado and PetaLinux Tools
This post contains everything needed to create a MicroBlaze design and boot Linux on it over JTAG. It also contains links to all the IP...
Feb 19, 20213 min read
2019.1 petalinux-boot --jtag --u-boot -v on a ZCU102
This post lists a log of petalinux-boot --jtag --u-boot -v on a ZCU102 from a 2019.1 build. Source Tools cd ~/plxprjs/ cd...
Feb 19, 20213 min read
2019.1 petalinux-boot --jtag --kernel -v on a ZCU102
This post lists a log of petalinux-boot --jtag --kernel -v on a ZCU102 from a 2019.1 build. Source Tools cd ~/plxprjs/ cd...
Jan 24, 20214 min read
Boot Linux from an SD Card on ZCU102 - Fix: 0x3B - Reading failed from the selected boot device
This post lists the commands to erase, and W95 FAT32 (LBA) format an SD card so you can boot Linux from it on a ZCU102, ZC702, or other...
Dec 25, 20202 min read
Debug a ZCU102 FSBL with Symbols using devshell
This post shows how to use devshell to debug the FSBL on a ZCU102 build. It also includes changes that enable source-level debug and...
bottom of page