This post lists the steps and code to dump the LoRa BEE v1.1 registers from a WeMos D1 Mini over SPI. Prerequisites 1. Follow Get and...

This post shows a solution to the espcomm_open failed error after clicking Upload on Linux. It also shows how to cause this error....

This post shows you how to configure minicom for a USB-to-Serial Converter, run it, and exit it.

This post lists the Zynq-7000 boot process as documented in the UltraFast Embedded Design Methodology Guide UG1046 (v2.3) April 20, 2018...

This post contains pictures, pinouts and documentation links for the Dragino LoRa BEE v1.1 and the HopeRF RFM95-98(W). Both Sides LoRa...

This post lists how to launch Vivado on Windows and Linux from icons and from the command line. This info is located in Vivado Design...

This post lists the Table of Contents, excepts and links to docs and training from the Vivado Design Suite User Guide: Design Flows...

This post lists the table of contents and the document links in the "Release Notes" doc listed at [link] a.k.a. the Vivado Design Suite...

This post describes how to install the board support package for the WeMos D1 Mini board into the Arduino IDE and blink the board's LED....

This post lists verified step-by-step instructions for getting, installing and running the 64-bit Arduino 1.8.7 IDE on Ubuntu 16.04.3....

This post lists the links to the Rock 2.4.1 Yocto documents. Yocto Project Reference Manual for 2.4.1 at [link] Yocto Project Mega-Manual...

This post is a summary of an error that I hit when trying to use devtool to rebuild the Linux kernel using PetaLinux 2018.2 from Xilinx:...

This post lists the links and steps to create and login to Senet to try out your device on a LoRaWAN. Steps to Create a New Account and...

This post shows all the steps to get, build and run the Vector Addition (CL) OpenCL example from Xilinx. Prerequisites Have a ZCU102...

Warning This post is a work in progress. Everything works until you see: !!!Problem!!! Using SDx 2018.2. Supported Boards This example...

This post shows how to access an SD card via a USB reader from Ubuntu 16.04.3 running in a virtual machine hosted by VirtualBox version...

This post is my run through of SDSoC Lab 1 Tutorial at [link]. Prerequisites Install SDSoC on Linux using a free 60-day trial and launch...

This post show you how to try SDSoC for free on Linux: install SDSoC 2018.2 on Ubuntu 16.04.3, get a free 60-day license and run SDSoC....

This post shows how to get access to PetaLinux Tools commands, build everything and program U-Boot and the Linux kernel onto the ZCU102....